CAS:78-08-0 Product spec:Chemical Name: Vinyltriethoxysilane
Product Description Chemical Name: Vinyltriethoxysilane CAS NO. : 78-08-0 Against other brands:EINECS No：201-081-7 Silquest A-151 Dow Corning:Z-6518/OFS-6518 ShinEtsu:KBE-1003 Wacker:GENIOSIL® GF 56 Specifications Appearance Colorless transparent liquid Colour(Pt-Co) ≤ 25 Specific Gravity（ρ20°C, g/cm3） 0.898-0.908 Refractive Index（） 1.3955–1.3965 Purity（% ） ≥ 98.0

CAS: Product spec:Physical Strength(%):（for macroporous）≥ 90
Preparation of pure water, especially for water source with higher salt and organic, waste water treatment in electroplating to move Cr。 Type:macroporous strongly basic Matrix:polystyrene Function Group:-N(CH3)2H2O Ionic Form:Free amine Moisture Content(%):48~58 Total Exchange Capacity (mmol/g):≥ 4.8 Total Exchange Capacity (mmol/ml):≥1.45 Shipping Weight (g/ml):0.65~0.72 True(wet) Density (g/ml):1.03~1.06 Particle size Range (%):0.315~1.25mm≥ 95 Physical Strength(%):（for macroporous）≥ 90

CAS: Product spec:Physical Strength(%):（for macroporous）≥ 90
Preparation of pure water, recovery of heavy metals, hydrometallurgy Type:macroporous strongly basic Matrix:polystyrene Function Group:-N+(CH3)3 Ionic Form:Cl- Moisture Content(%):50 ~ 60 Total Exchange Capacity (mmol/g):≥ 3.8 Total Exchange Capacity (mmol/ml):≥ 1.2 Shipping Weight (g/ml):0.65~0.73 True(wet) Density (g/ml):1.05~1.00 Particle size Range (%):0.315~1.25mm≥ 95 Physical Strength(%):（for macroporous）≥ 90

CAS: Product spec:PhysicalStrength(%):（formacroporous）≥90
Water softening and preparation of pure water, waste water treatment, recovery of noble metals, and as acidic catalysts. Type:macroporous weakly acidic Matrix:polystyrene Function Group:-SO3- IonicForm:Na+ Moisture Content(%):45 ~ 55 Total ExchangeCapacity (mmol/g):≥4.35 Total ExchangeCapacity (mmol/ml):≥1.8 Shipping Weight (g/ml):0.77~0.85 True(wet) Density (g/ml):1.25~1.28 Particle sizeRange (%):0.315~1.25mm≥95 PhysicalStrength(%):（formacroporous）≥90

CAS: Product spec:PhysicalStrength(%):（formacroporous）≥95
Water softening, dealkalination, desalination, recovery of Zinc and nickel in waste water, separation and purification of biochemiclas。 Type:macroporous weakly acidic Matrix:acrylic acid Function Group:-COO- IonicForm:H+ Moisture Content(%):45 ~ 52 Total ExchangeCapacity (mmol/g):≥11.0 Total ExchangeCapacity (mmol/ml):≥4.4 Shipping Weight (g/ml):0.72~0.80 True(wet) Density (g/ml):1.14~1.20 Particle sizeRange (%):0.315~1.25mm≥95 PhysicalStrength(%):（formacroporous）≥95

CAS: Product spec:Swelling（Na---H)%≤10
This dried resin can bind and retain unwanted cation salts, un-reacted catalyst, soaps, glycerin and water. It is a very effective tool to complete a final polishing of biodiesel. Removal of cation salts and water from other organic systems as well. Appearance:Black / Dark brown spherical beads PolymerMatrix Structure :Styrene - DVB Type:Gelstrong acid FunctionalGroup :R—(SO3)-M+ IonicForm :H+ MoistureContent %≤3 Capacityin Volume mmol/ml≥1.8 ShippingWeight g/ml 0.78– ~0.83 Densityg/ml 1.17– 1.22 WholeBead Rate %≥99 Swelling（Na---H)%≤10

CAS: Product spec:PhysicalStrength(%):（formacroporous）≥90
BA700(NC) can be mixed in the desired ratio with the strongly acidic cation resin BC121(NC). And used in ultra-pure water in the nuclear industry with low ion leaching Type:macroporous : strong basic Matrix:acrylic polystyrene IonicForm: cl- Moisture Content(%):42 ~ 48 Total ExchangeCapacity (mmol/g):≥306 Total ExchangeCapacity (mmol/ml):≥1.4 Shipping Weight (g/ml):0.67~0.73 True(wet) Density (g/ml):1.07~1.10 Particle sizeRange (%):0.315~1.25mm≥95 PhysicalStrength(%):（formacroporous）≥90

CAS: Product spec:PhysicalStrength(%):（formacroporous）≥90
BC120 can be used for the removal of cations including radioactive isotopes from aqueous solutions. It also can be mixed in the desired ratio with the strongly basic anion resin BA700(NC). And used in ultra-pure water in the nuclear industry with low ion leaching. Type:macroporous : strong acidic Matrix: polystyrene IonicForm: Na+ Moisture Content(%):45 ~ 50 Total ExchangeCapacity (mmol/g):≥4.5 Total ExchangeCapacity (mmol/ml):≥1.9 Shipping Weight (g/ml):0.77~0.87 True(wet) Density (g/ml):1.25~1.29 Particle sizeRange (%):0.315~1.25mm≥95 PhysicalStrength(%):（formacroporous）≥90

CAS:15305-07-4 Product spec:in 20kg net cartons
●Product name: Tris (N-nitroso-N-phenylhydroxylamine) aluminum salt Synonymes name: Syna-IN 510 CAS Number: 15305-07-4 Molecular weight: 438.33 ●Specification: Item Standard Appearance Off-white to pale yellow powder Assay 98%min Melting point 165-170d.C ●Application: It is used to increase the shelf time of olefinic resins. It may be used in coatings, adhesives, photoresists, printing inks and printing plates as well as unsaturated polyester resins, vinyl monomers and acrylate oligomers. ●Package: In 20kgs net cartons.

CAS: Product spec:99%
This Deodorant is developed by the latest high-tech purification processes and extracted from a number of purely nature plants without any chemicals. It will have high removal efficiency to the residual peculiar smell after the indoor decoration pollution treatment, unpleasant smell in life and tobacco smoke etc. This product is nontoxic, harmless, safe and reliable, without risk to health and widely used in family, hotel and entertainment center and so on. It can spray the surface of indoor wall, furniture, cabinets etc.

CAS: Product spec:90%
The photocatalytic textile finishing agent is a stable water-based dispersing-finishing agent made with self-developed photocatalyst using internationally advanced technologies. Through curing processes, the agent enters and sets onto the fabric fibers to endow fabrics with such properties as lasting UV resistance, sterilization, odor removal, fouling resistance, easy cleaning and ageing resistance. It can be used on cotton, linen, silk, wool, rayon, polyester, polyamide and blended fabrics to give them strong UV resistance to protect the human body from the harm of UV rays. 　　According to tests by the Japan Synthetic Textile Inspection Institute Foundation, fabrics treated with the photocatalytic finishing agent have a UV-blocking rate of 95%; after 5 washing cycles, the UV-blocking rate is 94%.

CAS: Product spec:90%
This product is a environmentally friendly product, used plant extracts with function to clean up the air as its principal ingredient and prepared by scientific processing technics in advance .Spraying the product directly on the inner face of plank，it then condenses with formaldehyde、benzene、toluol、TVOC on the plank surface .So the formaldehyde、benzene、toluol、TVOC can be quickly and easily removed.This non-toxic, tasteless, is the green environmental protection product.The results of field operation showed that it has very good result to help remove the indoor air pollution.

CAS:115-96-8 Product spec:99%
Because it both has chlorine and phosphate in the molecular of the product, so it has obviously flame retardant and plastic properties for the plastic, unsaturated resin product (FRP), rubber product. And It has widely used I in the PVC, flexible PU foam, hard Foam, cellulose acetate, nitro cellulose lacquer, ethyl cellulose lacquer, hard -to flame-rubber and rubber conveyor belt at home and aboard. The made products have the properties of self–extinguishing, weather resistance, cold resistance, antistatic, and it also can be used as extreme pressure lubricant additive , gasoline additives, and Metal Magnesium pad Coolant.

CAS:13674-84-5 Product spec:90%
Because this product both has phosphorus and Chlorinity, having obvious flame retardant, so it has increase plastic , moisture-proof , anti-static effect, it mainly used in soft and hard polyurethane foam, ring chloride resin, polystyrene, cellulose acetate , ethyl cellulose trees and phenolics, polyvinyl acetate, and the gun foam sealant production. Especially make it use in rigid Polyurethane Foam, which has excellent thermal conductivity and hydrolysis stability. And in the ASTM84 (II), polyurethane foam and unsaturated compounds, and Bakelite resin have viscosity at low temperature. usually with two antimony trioxide used in conjunction to improve the efficiency of fire-retardant.

CAS:68937-41-7 Product spec:90%
It is the same product with produced by the British CIBA-GEIGY (Ciba - Geigy) , which is advanced flame retardant and plasticizer both having flame retardant and plasticizer function. Comparing with other phosphate ester plasticizer and brominated plasticizer, it has non-toxic, odorless, light radiation resistance, mildew proof, can dissolve not to spray, good plasticizer, best flame retardant.

CAS:756-79-6 Product spec:25%
DMMP flame retardant is widely used in polyurethane Foam plastic, unsaturated polyurethane resins, epoxy resin and other polymer material because of having high phosphorus content, little additive, excellent flame retardant. The made products has self-off , low temperature , plasticity, stable UV, antistatic properties. DMMP as a flame retardant, when you can use it , you should add it, when using in polyurethane foam or mixing with polyether, you can’t store it for a long time

CAS:78-40-0 Product spec:99%
Triethyl phosphate ( TEP) is colorless transparent liquid , melting point is -56.5℃, boiling point : 215~216℃, flash point is 115.5℃, reactive density : 1.0695(20℃) , refractive index : 1.4055(20℃), soluble in water , soluble in organic solvent especially in alcohol, aether , benzenes.

CAS: Product spec:Liquid
There exists huge variety of Liquid Paraffin thats capable of impressing absolutely anybody with its high quality. There exists huge variety of Liquid Paraffin thats capable of impressing absolutely anybody with its high quality. The Liquid Paraffin supplied by us is of latest technology as we have our strong believe in supplying excellent quality material.

CAS:1310-73-2 Product spec:99%,96%,98%
Dangerous Class 8.2 Molecular formula NaOH Molecular wt 40.01 Production standard GB209/93 Index Spec- 99% NaOH content % ≥99.0 Na2CO3 % ≤1.0 NaCl % ≤ 0.08 Fe2O3 % ≤0.01 Appearance: White Flakes

CAS:13674-84-5 Product spec:grade product
Tris(2-chloroisopropyl) phosphate Simplename: TCPP Synonyms: TCPP, tris(1-chloro-2-propyl) phosphate CAS#: 13674-84-5 Molecular Weight: 327.56 Molecular: C9H18Cl3O4P Quality: Index Specification Appearance Colorless or light-yellow transparent liquid Color(APHA) 80MAX Acidity(mgKOH/g) 0.10MAX Water Content分 0.10%MAX Flash Point ℃ 210 Viscosity(25°C) 67±2CPS Phosphorus Content 9.40% Refractive Index 1.4630-1.4645 Specific Gravite 1.280-1.290 Chemical properties: It’s light-yellow or oil liquid and is resolved in benzene, alcohol etc., is unresolved in water and fat hydrocarbon. Use: It’s fire retardant of rubber and painting, and also used as the material of polyurethane foams, adhesives and other resins. Productivity: 5000tons/year Packing: 250kgs/iron drum, Measurement:560×890mm; 1000KGS/IBC; 20-23MTS/ISOTANK.

CAS:64359-81-5 Product spec:≥98.0%
DCOIT is a new type high effective biocide. It is a winner of USA President’s environmental awards in 1994. It has a broad spectrum of activity against fungi, algae and bacteria, especially bacterial slime, algae, barnacles, seaweed, and other marine organisms. It is a ideal substitute for traditional antienvironmental biocides.

CAS:2682-20-4 Product spec:--
MIT is a broad spectrum biocide for the preservation of leave on products such as, body lotions, sun care products and hair gels. Their broad spectrum bacterial control compatibility with fungicides like methylparaben, in-formulation stability and risk assessment /safety profile make them particularly suitable for use in skin care products. MIT does not release or generate formaldeyhde. It is compatible with surfactants and emulsifiers and exhibits excellent stability in high pH formulations and ZPT-based antidandruff shampoos. Finally, MIT is fully water dilutable and readily incorporated into cosmetic formulations.

CAS:79-94-7 Product spec:99.5%
Tetrabromobisphenol A (TBBPA) has the largest market among brominated flame retardants. It is a white to off-white powder melting point of 180 -184°C ; soluble in methanol and ether. TBBPA is produced by the bromination of BPA (bisphenol A) with various solvents such as halocarbon alone, hydrobromic acid, aqueous alkyl monoethers, acetic acid ( with sodium acetate to improve colouror) or methanol (methyl bromide is expected as a co-product). Tetrabromobisphenol A (TBBPA) is used as a reactive flame retardant in epoxy, vinyl esters and polycarbonate resins. The main application of TBBPA in epoxy resins is in PCB (printed circuit boards) where the bromine content may be 20% by weight. It is used also as a flame retardant in polymers such as ABS, polystyrenes, phenolic resins, adhesives, paper, and textiles and others. TBBPA can be combined with a synergist such as antimony trioxide for maximum flame retardant performance. TBBPA may also be used as a parent compound for the production of other commercial flame retardants, such as tetrabromobisphenol A bis(2-hydroxyethyl ether), tetrabromobisphenol A dibromopropylether, tetrabromobisphenol A bis(allylether), tetrabromobisphenol A carbonate oligomers, and tetrabromobisphenol A brominated epoxy oligomer. TBBPA is the largest volume brominated flame retardant (BFR) in production today to improve fire safety of mainly electrical and electronic equipment. The main application of TBBPA is as a reactive flame retardant in laminates (e.g. epoxy resins) for an estimated 90+% of printed wiring boards. TBBPA is also used as an additive flame retardant in ABS plastics. TBBPA is chemically bound in these applications and has no potential for emissions to the environment Among all the different flame retardants that can be used in printed wiring boards, TBBPA is the most well researched flame retardant. According to both the WHO and the currently undertaken EU Risk Assessments, TBBPA has little potential for bioaccumulation and presents no significant health effects of concern. Also, No emissions from circuit boards could be detected TBBPA is currently being risk-assessed at the EU-level.

CAS:84852-53-9 Product spec:81 min
Decabromodiphenyl Ethane Chemical Name: Decabromodiphenyl Ethane Brand Name: YCFR-03 CAS NO.: 84852-53-9 Chemical Formula: C14H4Br10 Molecular Weight: 971.23 Application: YCFR-03 flame retardant has very good thermal stability and high bromine content making it a prime candidate for high temperature applications. It exhibits good UV resistance and hence is suitable for use in many applications requiring color stability. Because of its very good thermal stability and low blooming characteristics, It can be used in a wide range of high performance applications.In particular it finds use in styrenic polymers, engineering resins, wire & cable and elastomers. YCFR-03 flame retardant is suitable for use in systems where recycling is anticipated. It is not acutely toxic and teratogenic, no harmful to the environment can be used in the formulation of products meeting European dioxin ordinances. Specification Data Sheet Items Specification Analysis result Appearance White powder White powder Bromine Content % 81 min 81.89 Whiteness % 88 min 92.1 Melting Point ℃ 345 min 345 Moisture % 0.01 max 0.006 Free Bromine ppm 20 max Absent Particle Size µm 3 max 1.70 Density 3.2 3.2

CAS:3194-55-6 Product spec:99min
Hexabromocyclododecane Thermal Stability Chemical Name: Hexabromocyclododecane Thermal Stability Brand Name: YCFR-04TS CAS NO.: 3194-55-6 Chemical Formula: C12H18Br6 Molecular Weight: 641.7 Application: YCFR-04TS flame retardant is a stabilized grade of Yucheng Chemical. It show good thermal stability and provides excellent performance at low loading levels with minimum effect on polymer properties at higher processing temperatures. YCFR-04TS is recommended as an additive flame retardant for critical thermoplastic and thermosetting polymer applications requiring slightly higher thermal stability than YCFR-04. It is the product of choice for extruded polystyrene foam(XPS) and other styrene based resin systems where improved melt viscosity stability is needed in processing. Specification Data Sheet Analysis ltem Standard Analysis Result Appearance White powder White powder Bromine Content % 73.5min 73.6 Volatile Content % 2 hours 105℃ 0.2%max 0.15 Melting Point ℃ 180min 180~190 Particle Size % 80 mesh pass 95 100 Purity % 99min 99.1